Clear definitions of superabsorbent polymer terms AUL, CRC, FSC, cross-linking, free swell, gel blocking, saline absorbency and more.
The amount of liquid a SAP absorbs while under an applied pressure — a truer guide than free swell for any use where the gel bears load.
The principal monomer for most commercial SAPs; partially neutralized to sodium acrylate before or during polymerization.
Carrying fixed negative charges (such as carboxylate groups). This charge drives osmotic absorption — and is why capacity drops in salt.
Liquid retained after a swollen sample is centrifuged — a measure of usable, held capacity rather than maximum uptake.
Chemical bridges tying polymer chains into one network. Density controls the trade-off between capacity and gel strength.
The fraction of acid groups converted to their salt form; affects capacity, pH, and ionic behavior.
Absorbency measured in pure water — the highest, "headline" figure; real liquids absorb less.
Polymer not bound into the network that can leach out; lower is generally better for purity and performance.
Maximum liquid absorbed with no applied load. The big marketing number — compare it alongside CRC and AUL.
When swollen surface gel seals off dry polymer beneath, stopping further liquid from reaching it. Managed via particle size, gel strength, and surface cross-linking.
Firmness of the swollen gel — its resistance to deformation and gel blocking under load.
A water-swollen polymer network; a swollen SAP is a hydrogel.
"Water-loving" — the surface chemistry that lets a SAP take up aqueous liquid.
The pressure difference, driven by the higher ion concentration inside the network, that pulls liquid in. The primary absorption driver.
How SAP WorksThe spread of particle sizes; affects absorption rate, dust, and gel-blocking tendency.
The acidity or alkalinity of the swollen gel; relevant in sensitive or regulated applications.
An acrylamide-based polymer; more tolerant of ionic environments, common in soil and water applications.
Unreacted monomer left after polymerization; a purity and safety metric, measured in ppm.
Liquid released back out of a loaded gel under pressure — lower rewet means better retention.
Capacity in salt solution (commonly 0.9% NaCl). Far lower than DI water; the most realistic guide for body fluids, seawater, and many waste streams.
The dominant commercial SAP chemistry: cross-linked, partially neutralized polyacrylic acid. Highest capacity, salt-sensitive.
A cross-linked hydrophilic polymer that absorbs and retains aqueous liquid many times its own weight, swelling into an insoluble gel.
What Is a SAPExtra cross-linking applied to particle surfaces to raise gel strength and AUL and reduce gel blocking, without sacrificing core capacity.
How many times its own weight (or volume) a SAP takes up; the basic expression of capacity.
How quickly a SAP takes up liquid — measured as the time to stop a stirred vortex.
Using a swelling SAP (tape, yarn, or powder) to seal a structure — cable, joint, or tunnel — against water travel.
Lateral movement of liquid through or across a material; relevant to how fast liquid reaches dry SAP.
Our team is ready to help you find the right solution for your project.