Glossary

Super Absorbent Polymer Glossary

Clear definitions of superabsorbent polymer terms AUL, CRC, FSC, cross-linking, free swell, gel blocking, saline absorbency and more.

A

Absorbency Under Load (AUL) / Absorbency Against Pressure (AAP)

The amount of liquid a SAP absorbs while under an applied pressure — a truer guide than free swell for any use where the gel bears load.

Acrylic acid

The principal monomer for most commercial SAPs; partially neutralized to sodium acrylate before or during polymerization.

Anionic

Carrying fixed negative charges (such as carboxylate groups). This charge drives osmotic absorption — and is why capacity drops in salt.

C

Centrifuge Retention Capacity (CRC)

Liquid retained after a swollen sample is centrifuged — a measure of usable, held capacity rather than maximum uptake.

D

Degree of neutralization

The fraction of acid groups converted to their salt form; affects capacity, pH, and ionic behavior.

Deionized (DI) water capacity

Absorbency measured in pure water — the highest, "headline" figure; real liquids absorb less.

E

Extractables / soluble fraction

Polymer not bound into the network that can leach out; lower is generally better for purity and performance.

F

Free Swell Capacity (FSC)

Maximum liquid absorbed with no applied load. The big marketing number — compare it alongside CRC and AUL.

G

Gel blocking

When swollen surface gel seals off dry polymer beneath, stopping further liquid from reaching it. Managed via particle size, gel strength, and surface cross-linking.

Gel strength

Firmness of the swollen gel — its resistance to deformation and gel blocking under load.

H

Hydrogel

A water-swollen polymer network; a swollen SAP is a hydrogel.

Hydrophilic

"Water-loving" — the surface chemistry that lets a SAP take up aqueous liquid.

O

Osmotic pressure

The pressure difference, driven by the higher ion concentration inside the network, that pulls liquid in. The primary absorption driver.

How SAP Works
P

Particle size distribution (PSD)

The spread of particle sizes; affects absorption rate, dust, and gel-blocking tendency.

pH (of the gel)

The acidity or alkalinity of the swollen gel; relevant in sensitive or regulated applications.

Polyacrylamide

An acrylamide-based polymer; more tolerant of ionic environments, common in soil and water applications.

R

Residual monomer

Unreacted monomer left after polymerization; a purity and safety metric, measured in ppm.

Rewet

Liquid released back out of a loaded gel under pressure — lower rewet means better retention.

S

Saline absorbency

Capacity in salt solution (commonly 0.9% NaCl). Far lower than DI water; the most realistic guide for body fluids, seawater, and many waste streams.

Sodium polyacrylate

The dominant commercial SAP chemistry: cross-linked, partially neutralized polyacrylic acid. Highest capacity, salt-sensitive.

Superabsorbent polymer (SAP)

A cross-linked hydrophilic polymer that absorbs and retains aqueous liquid many times its own weight, swelling into an insoluble gel.

What Is a SAP

Surface cross-linking

Extra cross-linking applied to particle surfaces to raise gel strength and AUL and reduce gel blocking, without sacrificing core capacity.

Swelling ratio

How many times its own weight (or volume) a SAP takes up; the basic expression of capacity.

V

Vortex time / absorption rate

How quickly a SAP takes up liquid — measured as the time to stop a stirred vortex.

W

Water-blocking

Using a swelling SAP (tape, yarn, or powder) to seal a structure — cable, joint, or tunnel — against water travel.

Wicking

Lateral movement of liquid through or across a material; relevant to how fast liquid reaches dry SAP.

Need a Sample or Bulk Quote?

Our team is ready to help you find the right solution for your project.

Request a Sample

Try before you buy.

Get a Bulk Quote

Competitive pricing for your volume.

Talk to an Expert

Get application recommendations.